Volkswagen Eos Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Engine & Drivetrain
    So, I'm about to open up a 2008 EOS to inspect the CAM follower, I have done it once before but I want to replace the bolts with a stud kit to prevent any future issues. I have to swap the low pressure sensor on the HPFP since the $30 knock off part lasted about 4 weeks and yes, I have learned...
  2. D.I.Y. (Do It Yourself)
    Afternoon, Just a quick post re changing the fuel pump cam follower / plunger (item1 in the first pic) .The car is a stock 2007 2.0l tfsi engine code BWA, and has approx. 56k miles. There are loads of good YouTube videos to watch which give a good overview of the tools needed and how to go...
  3. D.I.Y. (Do It Yourself)
    I finally took the plunge and had at look at the High Pressure Fuel Pump cam follower, with its failure apparently being so devastating, as frequently reported on VW and Audi forums. When my car was approaching 120,000km and up for a major service, I (pessimistically?) acquired a replacement...
1-3 of 3 Results
Top